Doremi MCSHD User Manual download pdf (Page 65)

12.2.2 Recording the Video-Part

The audio should be recorded with the Video-part:

 Select “A Time” in the Time Code Mode menu (MENU (02)).

 Press the REC button only to set the V1-HD in EE mode. (Displays the video on the input).

 If you see a valid video signal on your monitor, press REC and PLAY at the same time to

start recording. The time-code will start incrementing one the V1-HD is in record.

 Press STOP to finish the recording the Video-part.

12.2.3 Recording the Key-Part

 Before recording the Key-part: locate to a time code location beyond the end of the recorded

video (Example: if the Video-part starts at 00:00:00:00 and ends at 00:10:00:00 locate to

01:00:00:00. To locate enter the time code value using the keypad and then press” Go To”)

 Press the REC button only to set the V1-HD in EE mode. (Displays the video on the input).

 If you see a valid video signal on your monitor, press REC and PLAY at the same time to

start recording. The time-code will start incrementing one the V1-HD is in record.

 Press STOP to finish the recording the Key-part.

Note: the V1 will record at the current position or at the end of file depending on the “Rec at:” setting

in OPTION MENU (01) “Transport”. For this operation set the “Rec at: to current position.

12.2.4 Merging the Video-part and the Key-Part

 Locate to the desired in-point of the Video-part recording and mark an IN point by pressing

the IN button.

 Locate to the desired Out-point of the Video-part recording and mark an Out-point by

pressing the Out button.

 Go to OPTION MENU (08) - Disk Copy

 Select Merge? And press Enter.

 The recording file name will be displayed.

 Press the ++ key the IN point will be displayed.

 Press the ++ key again the Out point will be displayed.

 Go out of the menu.

 Locate to a sync point on the Video-part recording. (The Sync-point S1 should be within the

marked IN and OUT points)

 Go back to the Menu.

 Press the ++ key the Sync-point S1 will be displayed.

 Press Enter to accept the S1 Sync-point.

 Go out of the menu.

 Locate to a sync point on the Key-part recording. (The Sync-point S2 should be within the

recorded Key-part video.)

 Go back to the Menu.

 Press the ++ key the Sync-point S2 will be displayed.

 Press Enter to accept the S2 Sync-point.

V_1.OM.000160.DRM Page 65 of 85 Version 5.2

Doremi Labs

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 84 85

No comments

Doremi MCSHD User Manual Page 65