Doremi MCSHD User Manual Page 48
- Page / 85
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
10 Option Menu
To call up the OPTION MENU Hold the OPTION and press the MENU (or down key ) buttons. Use
the arrow keys to scroll through the menu selections.
Use the ++ or -- buttons to scroll through the sub-menus. The TOGGLE button sets the parameters
for the selected sub-menu. Press TOGGLE to increase or increment a value and hold OPTION and
TOGGLE to decrease or use the JOG wheel.
TOGGLE is also used to execute a command (OPTION MENU (5) and (6)), you will be prompted
“are you sure?” press ENTER for yes or ESC for no.
To enter time code numerals use the numeric keypad. To enter numbers for the IP, Time and Date
use the keypad and press the “.” button to skip from one section to the next (i.e. month to date).
Press ENTER to save your settings.
Commands that change the mode of operation, such as changing the IP, Subnet Mask, SCSI ID,
rec/play mode etc, will require you to reboot the V1. Please wait 30 seconds before rebooting the V1
to ensure that the new settings take effect.
(0) Info/Mode
V1 (no.) Displays the V1 Version number
IP and Mask below must be set to conform to your LAN so that you can operate the V1 and upgrade
the firmware via the Ethernet connection.
IP (no.) Displays the current IP number of the V1. (Only part of the IP number is
displayed, to view the rest press TOGGLE)
Set the IP number by using the keypad. Press “.” to jump between the sections.
After inputting the IP numbers press ENTER. You will also need to go to
OPTION MENU (5) Save Setngs and save.
Wait 30 seconds and restart the V1 for the setting to take effect.
Mask (no.) Displays the current IP number of the V1. (Only part of the IP number is
displayed, to view the rest press TOGGLE)
Set the Mask number by using the keypad. Press “.” to jump between the
sections. After inputting the Mask numbers press ENTER. You will also need to
go to OPTION MENU (5) Save Setngs and save.
Wait 30 seconds and restart the V1 for the setting to take effect.
The functions below provide general information about your V1. Please have this information on
hand prior to contacting Doremi technical support.
S/N: (no.) Displays the unique serial number of your V1.
(no.) Megs RAM The total RAM on the V1 motherboard.
V_1.OM.000160.DRM Page 48 of 85 Version 5.2
Doremi Labs
- V 1 - H D 1
- V 1 - U H D 1
- V 1 - U H D / L E 1
- V i d e o S e r v e r s 1
- Table of Content 2
- Software License Agreement 6
- Hardware Warranty 6
- IMPORTANT 7
- W A R N I N G ! ! 9
- 1 Introduction 10
- 1.5 Contact Information 11
- 2 Design of Manual 12
- 3 Installation 13
- 3.1.3 Power Connection 14
- 3.2 Power On and Shut Down 15
- 3.3 Ethernet 15
- 3.4 Connecting RS422 16
- 3.5 Connecting GPI 16
- 4 Quick Start Procedures 17
- 4.5 How to Create a Playlist 19
- 4.6 How to Play a Playlist 20
- 4.7 Basic Menu Operations 20
- 4.9 Setup V1 for Playback 21
- 4.10 Setup V1 for Record 21
- 4.11 Remote Operation 21
- 5 Product Description 22
- 5.2 Front Panel 23
- Doremi Labs 24
- 5.2.3 Transport Controls 25
- 5.2.4 LCD Time Code Display 26
- 5.2.5 SCSI Drives 27
- 5.2.6 LCD Video Display 27
- 5.3 Rear Panel Description 28
- 5.3.2 Audio In/Out 29
- 5.3.3 9Pins Connector 29
- 5.3.4 Ethernet 29
- 5.3.5 Time Code 29
- 5.3.6 SCSI 30
- 6 Recording and Playback 31
- 6.2 Recording Modes 32
- 6.4.3 Creating a Segment 33
- 6.5.1 The Chase Command 35
- 6.7 Time Code Offset 36
- 7 Specific Applications 37
- 7.6 Audio Post 39
- 8 Menu Reference Chart 41
- 8.2 Option Menu Chart 42
- Option Menu Chart Cont… 43
- 8.3 Controller Menu Chart 45
- 10 Option Menu 48
- 10.1 Transport 50
- 10.2 Auto Play 51
- 10.3 New Rec Set 51
- 10.4 Init Disk 53
- 10.5 Save Setngs 53
- 10.6 SCSI Setup 54
- 10.7 Media Setup 54
- 10.8 Disk Copy 54
- 10.9 Vid IN 55
- 10.10 Vid OUT 55
- 10.11 Aud IN LVL 56
- 10.12 Aud OUT LVL 56
- 10.13 Edit Prst 56
- 10.14 Clicks/FR – Bi-Phase 56
- 10.15 Serial Port 57
- 10.16 TIME Code 57
- 10.17 J2K Params 57
- 10.18 VID Mixer 57
- 11 Controller Menu 58
- 12 Video and Key 60
- 12.1.2.1 Inputs Connections 61
- 12.1.2.2 Output Connections 62
- 12.2.1.1 Inputs Connections 64
- 12.2.1.2 Output Connections 64
- 12.2.3 Recording the Key-Part 65
- 12.2.6 Executing the Merge 66
- 13.1.2 Recording the 3D 69
- 13.1.2.2 Output Connections 70
- 13.2.1.1 Inputs Connections 72
- 13.2.1.2 Output Connections 72
- 13.2.2 Recording the Left-Eye 73
- 13.2.5 Creating the 3D File 74
- 13.2.6 Executing the Merge 75
- 14 Troubleshooting 76
- 15 Appendix 77
- 15.6 BiPhase Settings 80
- (recommended) 81
- 16 Document Revision History 85
Related products and manuals for Video Doremi MCSHD
Video Doremi S2H-30 User Manual
(39 pages)
(39 pages)
© 2020, manymanuals.com. All rights reserved. | 0.645 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals