Doremi MCSHD User Manual download pdf (Page 33)

6.4.3 Creating a Segment

To work with segments, first ensure that OPTION MENU (1) Transport Emulate is set to V1.

To create a segment, press IN button where you want the in point to be and press OUT where you

want the out point to be. You may mark IN and OUT on-the-fly while you are playing or you can

locate to each point individually (Enter Time Code and push GOTO or locate command on RS422)

and enter the in and out points separately.

Press SAVE and enter a number from 0001 to 2000 to identify the segment and then press ENTER.

To recall any defined segment for playback, press RECALL, enter the number of the segment from

0001 to 2000, and then press ENTER. The segment will play automatically and the LCD will display

the segment information as indicated in the following section.

NOTES :

The V1 will not save any segment number above 2000 and will not save segment number 0000.

When you enter a segment number, the V1 will locate to the start of the segment after a certain

delay. If you do not want the V1 to locate to those intermediate segment numbers, you should

enter the whole number quickly.

If you want to define the segment that will play directly after the one you have just entered, before

you hit ENTER press the up arrow key and enter the next segment (you can also define the

previous segment) then press ENTER.

6.4.4 Creating a Play List and Loops

Once the segments are fully defined as described above, a play list can be defined to automatically

chain or loop segments during playback. In order to implement this list, each segment requires the

definition of a "next segment" parameter and, optionally, a "previous segment" parameter.

To define the next segment:

 Press RECALL, enter the number of the segment to modify, press ++, the LCD will display "Next

Seg:", enter the segment number of the segment you want to play next and press ENTER. Note

that you are only allowed to enter valid segment numbers.

 Do the above for each segment you want to chain.

 To create a “play list” that loops simply have the last segment of the chain point to the first

segment of the chain

 If you want to create a loop of a single segment, recall a segment and set the “next segment” to

the same number as the segment you just recalled.

Define a previous segment only when you want to insert a segment into an existing play list:

 Press RECALL and enter the number of the segment to be inserted, press --, the LCD will

display "Prev Seg:", enter the segment number that will precede it in the play list and press

ENTER.

 Press RECALL and enter the number of the segment to be inserted, press ++, the LCD will

display "Next Seg:", enter the segment number that will follow in the play list and press ENTER.

NOTE: You are only allowed to enter valid segments.

V_1.OM.000160.DRM Page 33 of 85 Version 5.2

Doremi Labs

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 84 85

No comments

Doremi MCSHD User Manual Page 33