Doremi MCSHD User Manual download pdf (Page 62)

12.1.2.2 Output Connections

 The Video-part output is on SDI Out-A1 and SDI Out-A2.

 The Key-part output is on SDI Out-B1 and SDI Out-B2.

Figure 25: SDI Video Output A and B Connection

12.1.2.3 Recording in Time Code Mode

To record using the Source Time-Code:

 The NDF/DF selection when creating the file (OPTION MENU (03) ”New Rec Set”) should

match the source time-code.

 Select “LTC” or “ATC” time-code (OPTION MENU (17)).

 Select “Time Code” in the Time Code Mode menu (MENU (02)).

 Press the REC button only to set the V1-HD in EE mode. (Displays the video on the input).

 If you see a valid video signal on your monitor, and if the displayed time-code is increasing

you can press REC and PLAY at the same time to start recording.

 Press STOP to finish the recording.

Note: The message “Wrong TC Fed” will be displayed in the following cases:

 The time-code fed is not detected.

 The selection of LTC/ATC is not the same as the time-code source.

 The NDF/DF file setting does not match the incoming time-code format (NDF/DF)

 The incoming time-code exceeds the time-line duration.

V_1.OM.000160.DRM Page 62 of 85 Version 5.2

Doremi Labs

SDI Video: Out-A1 and Out-A2

Video-part

SDI Video: Out-B1 and Out-B2

Key-part

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 84 85

No comments

Doremi MCSHD User Manual Page 62