Doremi GHX-10 User Manual

G H X - 1 0User ManualVersion 2.2Compliant with GHX-10 Firmware version 1.4.0and Doremi Universal Interface version 4.0.2GHX.OM.000510.DRM

3.2 Input MenuThis menu can be used to setup the input parameters.Sub-Menu Value DescriptionInterface SDIHDMI/DVIPatternInput interface setting. Patt

3.3 Output MenuThis menu can be used to setup the output parameters.Sub-Menu Value DescriptionInterface HDMI/DVISDISet the active output. For common

Sub-Menu Value DescriptionAncillary out OffBypass SDIOff: No VANC on SDI outputBypass SDI: Pass Ancillary data from SDI input to SDI outputHDMI/DVI co

Sub-Menu Value DescriptionDVI Frequency Auto23.98242529.973047.95485059.9460Match inputMatch input *2Set the DVI output frequency . This list shows al

3.3.1 Color SpaceThe ITU-R BT.709-5 (HD formats) and ITU-R BT.601-5 (SD formats) Standards define the range of color values in a digital signal to b

Sub-Menu Value DescriptionInput LUT User Defined0.1 to 4.0 default 1.0Set the Gamma Curve from 0.1 to 4.0 or choose User Defined to use a custom LUT t

Sub-Menu Value DescriptionLevel -18, -12, -6, 0, +6, +12, +18 dBAudio Output level settingHDMI Channel out Auto2468OffSet the HDMI audio output modeAu

3.7 OSD MenuThis menu can be used to setup the OSD parameters.Sub-Menu Value DescriptionOSD Enable YesNoEnable or disable On Screen DisplayOSD timeou

3.8 System MenuThis menu allows to access the system parameters.Sub-Menu DescriptionSave Save current settings to flash. Select to Save, when you get

4 Infrared Remote Controller The buttons on the IR remote are used to access the unit while observing the On Screen Display (OSD). Left and Right arr

Table Of Contents1 Introduction...

4.2 Remote Controller FunctionsRemote Control FunctionInput format selection Select HD-SDI, SDI, HDMI/DVI (through the DVI-D/HDMI button) or PatternN

4.3 Quick Input Format SettingTo select the input format, press one of the buttons available at the top of the remote controller.Figure 4: Quick Inpu

5 Doremi Universal Interface Software (duis)5.1 Doremi Universal Interface Software InstallationTo install the Doremi Universal Interface software,

• Last step : Wait for the driver installation to be completed. Click on the “Finish” button when done.Figure 7: ”Found New Hardware Wizard” Window

5.2 Doremi Universal Interface Software OverviewThe Doremi Universal Interface Software (duis) consists of a GUI that can control one or more GHX-10

5.3 Settings WindowThe “Settings” window can be used to manage settings files• To save the current duis settings into a file, enter a settings filena

5.4 Tabs Description5.4.1 Input TabThe input tab is presented in Figure 9 above. All parameters are explained earlier in this manual in the chapter

5.4.3 Image TabThis is a screen shot of the “Image Tab”:Figure 12: duis – Image TabAll parameters are explained earlier in this manual in the Section

5.4.4 Sync I/O TabBelow is a screen shot of the “Sync I/O Tab”:Figure 13: duis – Sync I/O TabAll parameters are explained earlier in this manual in t

5.4.5 Audio TabThis is a screen shot of the “Audio Tab”:Figure 14: duis – Audio TabAll parameters are explained earlier in this manual in the Section

7.3 Audio... 337.4 Video

5.4.6 OSD TabBelow is a screen shot of the “OSD Tab”:Figure 15: duis – OSD TabAll parameters are explained earlier in this manual in the Section 3 t

5.4.7 System TabThis is a screen shot of the “System Tab”:Figure 16: duis – System TabAll parameters are explained earlier in this manual in the Sect

6 Firmware UpdateThe firmware can be updated through USB or SD Memory. This section presents both methods. In case you miss one of the files listed i

7 Annex A: Specifications7.1 Inputs• HDMI without HDCP• Single or Dual Stream HDSDI (For dual stream HDSDI, the two inputs must comply with SMPTE St

7.4 VideoSupported Input(s) Supported Output(s)SD-SDI: NTSC, PALHD-SDI: all HD +2K formats (SMPTE 274, SMPTE296, SMPTE372)HDMI/DVI: 640x480 =

8 AcronymsTerm DefinitionDVI Digital Visual InterfaceHDMI High-Definition Multimedia Interface HD-SDI High Definition Serial Digital InterfaceIR Infr

9 Document Revision HistoryDate Version Description10/31/2008 1.0 First version.11/10/2008 1.2 Editorial changes.12/11/2008 1.3 GHX Control Panel GUI

Software License AgreementThe software license agreement can be found at the following location:http://www.doremilabs.com/support/proav-support/proav-

1 IntroductionThis document provides guidance on how to use the GHX-10 device. It explains the front panel, the infrared remote control, and the Dore

2 GHX-10 Overview2.1 GHX-10 DescriptionThe GHX-10 is a Universal Cross Converter that incorporates High-Definition Multimedia Interface technology,

2.1.2 GHX-10 Rear PanelBelow is a snap shot of the GHX-10 rear panel:Figure 2: GHX-10 Rear PanelThe rear panel has the following connectors:Connector

2.2 Supported FormatsThe table below summarizes all supported inputs and outputs available on the GHX-10.Supported Input(s) Supported Output(s)SD-SDI

3 GHX-10 Front Panel ControllerThroughout this chapter “press Select” refers to pressing the front panel scroll wheel button of the GHX-10 – see Figu