Doremi ShowVault / IMB User Manual

SHV.OM.002220.DRM Page 1 of 13 Version 1.1 Doremi Labs ShowVault and IMB Chase Mode User Manual Version 1.1

SHV.OM.002220.DRM Page 10 of 13 Version 1.1 Doremi Labs Figure 8: Name the Macro Select the “Chase On” macro and press the “Insert a new Action” but

SHV.OM.002220.DRM Page 11 of 13 Version 1.1 Doremi Labs 14. Press Ok to complete inserting the macro (Figure 11). Figure 11: Insert Macro Window Fi

SHV.OM.002220.DRM Page 12 of 13 Version 1.1 Doremi Labs Figure 13: CPL Cued for Chase Mode End of document. Playback Mode Drop-down box Playback

SHV.OM.002220.DRM Page 13 of 13 Version 1.1 Doremi Labs 3 Document Revision History Date Revision Description 05/01/2012 1.0 First version of the

SHV.OM.002220.DRM Page 2 of 13 Version 1.1 Doremi Labs Table of Contents 1 Introduction ...

SHV.OM.002220.DRM Page 3 of 13 Version 1.1 Doremi Labs 1 Introduction Using specific software, firmware, and DLM (Doremi License Message), the Sho

SHV.OM.002220.DRM Page 4 of 13 Version 1.1 Doremi Labs 1.2 Required Software, Firmware, and License For the ShowVault and IMB to support Chase mod

SHV.OM.002220.DRM Page 5 of 13 Version 1.1 Doremi Labs 2 Procedure There are two possible configurations for a Chase Mode setup: 1. Master and Sla

SHV.OM.002220.DRM Page 6 of 13 Version 1.1 Doremi Labs 2.1 Detailed Connection Diagram Note: The IP addresses presented in this example are for de

SHV.OM.002220.DRM Page 7 of 13 Version 1.1 Doremi Labs Figure 4: Chase Connectivity Diagram, More Than Two Projectors (Master/Slave)

SHV.OM.002220.DRM Page 8 of 13 Version 1.1 Doremi Labs Figure 5: Chase Connectivity Diagram, External Timecode

SHV.OM.002220.DRM Page 9 of 13 Version 1.1 Doremi Labs 2.2 Hardware Setup 1. If using the Master and Slave configuration, connect the SDI Out-A of